From € 42,53 |
Price incl. VAT |
plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The pointed cone-shaped burr according to DIN 8032, flattened point, with the MICRO cut is specially designed for fine machining and is used in areas in which mounted points are usually used.
- Carbide burrs with the MICRO cut offer higher stock removal rates and produce a high surface quality, especially compared to conventional milled surfaces.
- At the same time, they work with little vibration and little noise.
- The carbide burrs retain their geometry over the entire service life and are ideally suited for machining tasks in manual and machine use.
- Almost all materials can be machined up to a hardness of 68 HRC.
- Material - hard metal
- Serration - MICRO
- Milling pin Ø x length - 6 x 18 to 12 x 25 mm
- Total length - 55 to 65 mm
- Angle - 18 ° to 26 °
- Shank Ø - 6 mm
Versions: (4)
Narrow down your selection
Burr Ø x length
overall length
angle
Article No. | Burr Ø x length | overall length | angle | Price incl. VAT | |||||
---|---|---|---|---|---|---|---|---|---|
![]() |
652121115076 | 6 x 18 mm | 55 mm | 18 ° |
|
||||
|
|||||||||
![]() |
652121115086 | 8 x 20 mm | 60 mm | 22 ° |
|
||||
|
|||||||||
![]() |
652121115176 | 10 x 20 mm | 60 mm | 28 ° |
|
||||
|
|||||||||
![]() |
652121115276 | 12 x 25 mm | 65 mm | 26 ° |
|
||||
|
Ratings
No evaluation has been given