Milling pin - PFERD - Carbide metal - Shank Ø 6 mm - for steel - pointed arches
| From € 36,02 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, for changing the geometry and for cleaning steel and cast steel, especially round shapes
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hardmetal in pointed arc shape, with special STEEL teeth, which has been specially developed for the machining of steel and cast steel and has a cutting performance of up to 50%
- Due to the special tooth geometry, the chip removal is significantly improved, the workpiece and tool are protected by the lower thermal load
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - STEEL
- Form - arched form
- Shaft diameter - 6 mm
- Total length - 55 to 70 mm
- Milling pin Ø x length - 6 x 18 to 16 x 30 mm
- In accordance with DIN 8032
Versions: (5)
Narrow down your selection
designation
overall length
Milling pin Ø x length
| Article No. | designation | overall length | Milling pin Ø x length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
|
652121122587 | SPG 0618/6 STEEL | 55 mm | 6 x 18 mm |
|
||||
|
|||||||||
|
652121122588 | SPG 0820/6 STEEL | 60 mm | 8 x 20 mm |
|
||||
|
|||||||||
|
652121122687 | SPG 1020/6 STEEL | 60 mm | 10 x 20 mm |
|
||||
|
|||||||||
|
652121122787 | SPG 1225/6 STEEL | 65 mm | 12 x 25 mm |
|
||||
|
|||||||||
|
652121122887 | SPG 1630/6 STEEL | 70 mm | 16 x 30 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
