Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for cast iron - ball shape
| From € 41,11 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of tungsten carbide in spherical shape, with special CAST teeth, specially developed for the processing of cast iron, which has a cutting performance of up to 100% and increases the service life
- The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - CAST
- Shape - spherical shape
- Shaft diameter - 6 mm
- Total length - 45 to 51 mm
- Milling pin Ø x length - 6 x 5 to 12 x 10 mm
- In accordance with DIN 8032
Versions: (2)
Narrow down your selection
designation
overall length
Milling pin Ø x length
| Article No. | designation | overall length | Milling pin Ø x length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
652121112783 | KUD 1009/6 CAST | 49 mm | 10 x 9 mm |
|
||||
|
|||||||||
|
652121112883 | KUD 1210/6 CAST | 51 mm | 12 x 10 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
