End mills VHM TiAlN - for steel and cast iron - TYPE N - DIN 6527 long - shaft H
| From € 33,53 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- End mill used for milling wedge and keyways, as well as for universal processing.
- For steel, 850N, 1000N, 1400 N, 42HRc and cast iron materials
- Solid design for maximum processing 1 x d deep. Compared to a 2-cut the feed is up to 50% higher.
- Cutting speed approximately 50% higher than for uncoated tools.
- Dry processing possible.
- With center cutting
- Material - VHM TiAlN, Type N
- Cutting - 3 pieces
- Right spiral - 30 ° angle
- Unit shaft- DIN 6535-HB
Versions: (11)
Narrow down your selection
Diameter
Cutting length
Total length
Shaft Ø
| Article No. | Diameter | Cutting length | Total length | Shaft Ø | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
943115354013 | 3.0 mm | 7 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115354016 | 4.0 mm | 8 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115354019 | 5.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115354022 | 6.0 mm | 10 mm | 57 mm | 6 mm |
|
||||
|
||||||||||
|
|
943115354028 | 8.0 mm | 16 mm | 63 mm | 8 mm |
|
||||
|
||||||||||
|
|
943115354034 | 10.0 mm | 19 mm | 72 mm | 10 mm |
|
||||
|
||||||||||
|
|
943115354040 | 12.0 mm | 22 mm | 83 mm | 12 mm |
|
||||
|
||||||||||
|
|
943115354043 | 14.0 mm | 22 mm | 83 mm | 14 mm |
|
||||
|
||||||||||
|
|
943115354046 | 16.0 mm | 26 mm | 92 mm | 16 mm |
|
||||
|
||||||||||
|
|
943115354049 | 18.0 mm | 26 mm | 92 mm | 18 mm |
|
||||
|
||||||||||
|
|
943115354052 | 20.0 mm | 32 mm | 104 mm | 20 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
