From € 54,08 |
Price incl. VAT |
plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- For the INOX-processing
- Dry machining possible.
- Suitable for rough milling.
- Roughing end mills, for machining INOX FORUM
- After factory standard, center cutting.
- Cutting speed approximately 50% higher than with uncoated tools.
- The fine cord gearing produces small, easy to remove chips.
- This is achieved an improvement in the service life of the tool and a better surface quality.
- Material: Solid carbide UF, TiAlN
- Spiral: 45 °
- Type: HR
- Upper: HB
- Teeth: 3-6
- According to DIN6535-HB
Versions: (9)
Narrow down your selection
Ø d1 = 10 h
Cutting length l2
Total length l1
Shank diameter d2 = h 6
Number of teeth
Article No. | Ø d1 = 10 h | Cutting length l2 | Total length l1 | Shank diameter d2 = h 6 | Number of teeth | Price incl. VAT | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
4317784893671 | 4.0 mm | 11 mm | 57 mm | 6 mm | 3 | 65 mm | 12 mm | 12 mm |
|
||||
|
||||||||||||||
![]() |
4317784893688 | 5.0 mm | 13 mm | 57 mm | 6 mm | 4 | 67 mm | 17 mm | 14 mm |
|
||||
|
||||||||||||||
![]() |
4317784893695 | 6.0 mm | 16 mm | 57 mm | 6 mm | 4 | 64 mm | 17 mm | 12 mm |
|
||||
|
||||||||||||||
![]() |
4317784893718 | 8.0 mm | 16 mm | 63 mm | 8 mm | 4 | 89 mm | 22 mm | 17 mm |
|
||||
|
||||||||||||||
![]() |
4317784893732 | 10.0 mm | 22 mm | 72 mm | 10 mm | 4 | 88 mm | 19 mm | 17 mm |
|
||||
|
||||||||||||||
![]() |
4317784893749 | 12.0 mm | 26 mm | 83 mm | 12 mm | 4 | 88 mm | 19 mm | 17 mm |
|
||||
|
||||||||||||||
![]() |
4317784893756 | 14.0 mm | 26 mm | 83 mm | 14 mm | 5 | 102 mm | 27 mm | 24 mm |
|
||||
|
||||||||||||||
![]() |
4317784893763 | 16.0 mm | 32 mm | 92 mm | 16 mm | 5 | 104 mm | 27 mm | 24 mm |
|
||||
|
||||||||||||||
![]() |
4317784908948 | 20.0 mm | 38 mm | 104 mm | 20 mm | 6 | 119 mm | 29 mm | 27 mm |
|
||||
|
Ratings
No evaluation has been given