Reamer, Ø: 2-32 mm, cutting length: 50-265 mm, HSS
| From € 18,67 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- For reaming through holes for hole tolerance zone H7.
- Due to the long, conical gating - the greater feed rates than with a straight-fluted reamer allowed - not suitable for the machining of blind holes.
- Suitable for all ferrous, non-ferrous metals, plastics and for bores with interrupted cut.
- Reamer DIN 206-B
- With unequal tooth pitch - a round, chatter marks and accurate drilling is achieved.
- Approximately 7 ° left hand helix and a long, tapered cut (about 1/3 of cutting length).
- Cylindrical clamping shaft with square.
- Material: HSS
Other dimensions or form straight available on request.
Versions: (4)
Narrow down your selection
O
cutting length
total length
square
length
width
height
| Article No. | O | cutting length | total length | square | length | width | height | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
943114317784812696 | 2.00mm | 25 mm | 50 mm | 1.6 mm | 50 mm | 2 mm | 2 mm |
|
||||
|
|||||||||||||
|
|
943114317784813006 | 28,00 mm | 124 mm | 247 mm | 22.0 mm | 247 mm | 28 mm | 28 mm |
|
||||
|
|||||||||||||
|
|
943114317784813013 | 30.00 mm | 124 mm | 247 mm | 22.0 mm | 247 mm | 30 mm | 30 mm |
|
||||
|
|||||||||||||
|
|
943114317784813020 | 32,00 mm | 133 mm | 265 mm | 24.0 mm | 265 mm | 32 mm | 32 mm |
|
||||
|
|||||||||||||
Ratings
No evaluation has been given
