PFERD carbide burr - round arch shape RBF - 3 PLUS - burr Ø 6 and 10 mm - long shank Ø 6 mm - SL 150 mm
€ 82,40 |
Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121117727
Product Description
- Tungsten carbide burrs with long steel shank and 3 PLUS cut are particularly suitable for machining cast iron, steel, stainless steel (INOX), nickel-based and titanium alloys in particularly hard-to-reach areas.
- The arched burr is suitable for milling out hard aluminum alloys.
- The long steel shaft can be shortened by the user if the application requires it.
- To prevent kinking, the tool must be brought into contact with the workpiece before it is switched on.
- It is important to use only backlash-free drives or clamping systems, burrs with a long steel shaft are not suitable for robot or stationary use.
- The drive type is flexible shaft drive.
- The carbide burr achieves a high and economical cutting performance and a long service life due to the optimal coordination of toothing, carbide and geometry.
- Thanks to the exact concentricity, impact-free work without chatter marks is possible and the tool drive wears less.
- Material - hard metal
- Serration - 3 PLUS
- Shape - arch shape
- Milling pin Ø x width - 6 x 18 and 10 x 20 mm
- Total length - 172 to 170 mm
- Radius - 1.5 and 2.5 mm
- Long shaft Ø - 6 mm
Versions: (2)
Narrow down your selection
Burr Ø x length
overall length
radius
Ratings
No evaluation has been given