PFERD carbide burr - conical shape SKM - STEEL - burr Ø 10 and 12 mm - shank Ø 6 mm - SL 150 mm
| From € 63,24 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The pointed cone-shaped burr according to DIN 8032 with toothing according to DIN 8033, flattened tip and with long steel shank is suitable for versatile use for milling in metalworking such as deburring, machining contours, milling out or leveling steel and cast steel in hard-to-reach places.
- With the innovative STEEL cut, PFERD has developed unique burrs for machining steel and cast steel.
- They are characterized by a noticeably increased aggressiveness (large chips and very good chip evacuation) combined with good maneuverability and guarantee safe and precise work.
- The workpiece is protected by a lower thermal load.
- Thanks to their extremely high stock removal rate, the burrs with STEEL cut impress with their noticeable time savings and high economic efficiency.
- PFERDERGONOMICS recommends burrs with STEEL cut as an innovative tool solution for comfortable work with significantly reduced vibrations and less noise.
- Material - hard metal
- Toothing - STEEL
- Shape - pointed cone shape
- Milling pin Ø x length - 10 x 20 and 12 x 25 mm
- Total length - 170 and 175 mm
- Angle - 26 ° and 28 °
- Speed - 7,000 and 9,000
- Shank Ø - 6 mm
Versions: (2)
Narrow down your selection
Burr Ø x length
overall length
angle
RPM
Item No.: 652121115189
Type
| Burr Ø x length | 10 x 20 mm |
| overall length | 170 mm |
| angle | 28 ° |
| RPM | 9,000 |
| € 63,24 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121115289
Type
| Burr Ø x length | 12 x 25 mm |
| overall length | 175 mm |
| angle | 26 ° |
| RPM | 7,000 |
| € 92,56 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Ratings
No evaluation has been given
