PFERD carbide burr - conical shape SKM - MICRO - burr Ø 6 to 12 mm - shank Ø 6 mm
| € 94,42 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121115276
Product Description
- The pointed cone-shaped burr according to DIN 8032, flattened point, with the MICRO cut is specially designed for fine machining and is used in areas in which mounted points are usually used.
- Carbide burrs with the MICRO cut offer higher stock removal rates and produce a high surface quality, especially compared to conventional milled surfaces.
- At the same time, they work with little vibration and little noise.
- The carbide burrs retain their geometry over the entire service life and are ideally suited for machining tasks in manual and machine use.
- Almost all materials can be machined up to a hardness of 68 HRC.
- Material - hard metal
- Serration - MICRO
- Milling pin Ø x length - 6 x 18 to 12 x 25 mm
- Total length - 55 to 65 mm
- Angle - 18 ° to 26 °
- Shank Ø - 6 mm
Versions: (4)
Narrow down your selection
Burr Ø x length
overall length
angle
Item No.: 652121115076
Type
| Burr Ø x length | 6 x 18 mm |
| overall length | 55 mm |
| angle | 18 ° |
| € 50,80 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121115086
Type
| Burr Ø x length | 8 x 20 mm |
| overall length | 60 mm |
| angle | 22 ° |
| € 56,31 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121115176
Type
| Burr Ø x length | 10 x 20 mm |
| overall length | 60 mm |
| angle | 28 ° |
| € 67,96 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121115276
Type
| Burr Ø x length | 12 x 25 mm |
| overall length | 65 mm |
| angle | 26 ° |
| € 94,42 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Ratings
No evaluation has been given
