PFERD carbide burr - conical shape SKM - MICRO - burr Ø 3 to 6 mm - shank Ø 3 mm
| From € 27,47 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The pointed conical burr according to DIN 8032, flattened tip, with a MICRO cut is specially designed for fine machining and is used in areas where mounted points are usually used.
- Carbide burrs with the MICRO cut offer higher stock removal rates and produce a high surface quality, especially compared to conventional milled surfaces.
- At the same time, they work with little vibration and little noise.
- The carbide burrs retain their geometry over the entire service life and are ideally suited for machining tasks in manual and machine use.
- Almost all materials can be machined up to a hardness of 68 HRC.
- Material - hard metal
- Serration - MICRO
- Milling pin Ø x length - 3 x 7 to 6 x 13 mm
- Total length - 37 to 43 mm
- Shank Ø - 3 mm
Versions: (3)
Narrow down your selection
Burr Ø x length
overall length
| Article No. | Burr Ø x length | overall length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|
|
|
652121214073 | 3 x 7 mm | 37 mm |
|
||||
|
||||||||
|
652121214173 | 3 x 13 mm | 43 mm |
|
||||
|
||||||||
|
652121215073 | 6 x 13 mm | 43 mm |
|
||||
|
||||||||
Ratings
No evaluation has been given
