Non-return valve - brass - soft-seated - female thread G 3/8" to G 2" - PN 10 to PN 16

(Exemplary presentation)
From  5,33
Price incl. VAT
plus 29,00 shipping costs

Do you have any questions?
We would like to assist you!
 
Product Description
  • The non-return valve is ideally suited for liquid, non-aggressive media and mineral oils, not steam.
Application
  • The housing is made of brass and is fitted with a soft-sealing nitrile rubber gasket.
  • The flap closes by gravity and therefore only horizontal installation is possible.
Technical Data
  • Material housing - brass
  • Seal material - NBR soft-sealing
  • Female thread - G 3/8" to G 2"
  • Housing length - 43 to 94 mm
  • max. operating pressure - 10 to 16 bar
  • Temperature range - 0 to +90 °C
Versions: (7)
Narrow down your selection
Internal thread
Housing length
Operating pressure
Anzeigen als list Table
Article No. Internal thread Housing length Operating pressure Price incl. VAT
RUCK17651006 G 3/8" 43 mm 16 bar
5,33
Price incl. VAT
plus 29,00 shipping costs
RUCK17651003 G 1/2" 43 mm 16 bar
4,97
Price incl. VAT
plus 29,00 shipping costs
RUCK17651005 G 3/4" 52 mm 16 bar
6,89
Price incl. VAT
plus 29,00 shipping costs
RUCK17651000 G 1" 62 mm 12 bar
9,97
Price incl. VAT
plus 29,00 shipping costs
RUCK17651002 G 1 1/4" 72 mm 10 bar
14,82
Price incl. VAT
plus 29,00 shipping costs
RUCK17651001 G 1 1/2" 81 mm 10 bar
19,40
Price incl. VAT
plus 29,00 shipping costs
RUCK17651004 G 2" 94 mm 10 bar
27,18
Price incl. VAT
plus 29,00 shipping costs
This article is accessory of...
Ratings
Total Reviews
5.0 out of 5.0 stars / 1 Reviews
Bewertungsübersicht
5 Stars
(1)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Most positive Customer review VS Most negativ Customer review
Markus Dietrich
have the flap is not bein built but looks visually very well made,
when I'm at the input side of the mouth in bubble keeps them super tight, the passage is somewhat close but think bigger than that of such a valve spring, the resistance is probably lower than with spring
Customer Reviews
Markus Dietrich
16.01.2015
have the flap is not bein built but looks visually very well made,
when I'm at the input side of the mouth in bubble keeps them super tight, the passage is somewhat close but think bigger than that of such a valve spring, the resistance is probably lower than with spring
Search terms: Socket check valves, Non-return valve, Check valves, Socket check valves, Angle seat check valves, Brass, Brass valve