Milling pin - PFERD - Carbide metal - Shank Ø 6 mm - for cast iron - elbow form

€ 81,69
Price incl. VAT
Ex stock within 4 days deliverable
In 2 more variations available

Do you have any questions?
We would like to assist you!
verkauf@esska.de
 
Item No.:
652121122783
Type
designationSPG 1225/6 CAST
overall length70 mm
Milling pin Ø x length12 x 25 mm
In 2 more variations available
Product Description
  • The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
  • The operation can be carried out with compressed air or electric drives and bending shafts
Application
  • Milling pin made of carbide in pointed arc shape, with special CAST teeth, specially developed for the machining of cast iron, which has a cutting performance of up to 100% and increases the service life
  • The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
  • Thanks to "PFERDERGONOMICS", vibration and noise are reduced
  • For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
  • In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
Technical Data
  • Material - hard metal
  • Toothing - CAST
  • Form - arched form
  • Shaft diameter - 6 mm
  • Total length - 55 to 70 mm
  • Milling pin Ø x length - 6 x 18 to 12 x 25 mm
  • In accordance with DIN 8032
show more...
show less...
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
show all 3 implementations
Anzeigen als list Table
Item No.: 652121122583
Type
designationSPG 0618/6 CAST
overall length55 mm
Milling pin Ø x length6 x 18 mm
€ 43,00
Price incl. VAT
Ex stock within 4 days deliverable
Item No.: 652121122683
Type
designationSPG 1020/6 CAST
overall length60 mm
Milling pin Ø x length10 x 20 mm
€ 70,78
Price incl. VAT
Ex stock within 4 days deliverable
Item No.: 652121122783
Type
designationSPG 1225/6 CAST
overall length70 mm
Milling pin Ø x length12 x 25 mm
€ 81,69
Price incl. VAT
Ex stock within 4 days deliverable
Ratings


No evaluation has been given
Search terms: Milling pin, Milling pins, Milling pin, Milling pens, Milling pin, Milling pins, HM milling pin, HM milling pins, HM milling pin, HM milling pens, HM milling pin, HM milling pins, HM Milling pin, HM Milling Pins, Carbide milling tool, Carbide Milling Pins, Hard metal milling pin, Hard metal milling pens, Hard metal milling pin, Hard metal milling pins, Carbide milling cutter, Carbide milling cutters, Milling, grind, PFERD Milling pin, PFERD Milling Pins, HORSE Milling Pen, PFERD Milling Pins, PFERD milling pin, PFERD Milling Pins, PFERD HM milling pin, PFERD HM Milling Pins, HORSE HM milling pin, HORSE HM Milling Pins, PFERD HM-milling pin, PFERD HM milling pens, PFERD HM Milling pin, PFERD HM Milling Pins, HORSE, Top shape, Elbow form shaping pin, Milling pin in arched form, Pointed-shaped milling pin, Milling machine, CAST toothing, CAST, Milling pin with CAST toothing, Milling pin for cast iron, cast iron, HM milling pin for cast iron, PFERD HM milling pin for cast iron