Milling pin - PFERD - Carbide metal - Shank Ø 6 mm - for cast iron - Round arch form
| From € 44,27 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hard metal in round arch form, with special CAST teeth, specially developed for the processing of cast iron, which has a cutting performance of up to 100% and increases the service life
- The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm or more, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - CAST
- Form - Round arch form
- Shaft diameter - 6 mm
- Total length - 55 to 65 mm
- Milling pin Ø x length - 6 x 18 to 12 x 25 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
Item No.: 652121117383
Type
| designation | RBF 0618/6 CAST |
| overall length | 55 mm |
| Milling pin Ø x length | 6 x 18 mm |
| radius | 1.5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 44,27 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121117783
Type
| designation | RBF 1020/6 CAST |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
| radius | 2.5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 72,58 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121117883
Type
| designation | RBF 1225/6 CAST |
| overall length | 65 mm |
| Milling pin Ø x length | 12 x 25 mm |
| radius | 2.5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 84,13 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
