Milling pin - PFERD - Carbide metal - Shank Ø 3 mm - for INOX - Round arch form
| From € 29,47 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX)
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hardmetal in round arch form, with special INOX teeth, specially developed for machining stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Form - Round arch form
- Shank diameter - 3 mm
- Total length - 43 mm
- Milling pin Ø x length - 3 x 13 or 6 x 13 mm
- Radius - 0.75 or 1.5 mm
- In accordance with DIN 8032
Versions: (2)
Narrow down your selection
designation
Milling pin Ø x length
radius
Item No.: 652121218132
Type
| designation | RBF 0313/3 INOX |
| Milling pin Ø x length | 3 x 13 mm |
| radius | 0.75 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 29,47 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121230082
Type
| designation | RBF 0613/3 INOX |
| Milling pin Ø x length | 6 x 13 mm |
| radius | 1.5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 32,49 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
