Milling pin - PFERD - Carbide metal - Shaft Ø 6 mm - for cast iron - Rolling mold
| From € 37,36 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of tungsten carbide in the form of a roll, with special CAST teeth, specially developed for the machining of castings, which has a cutting performance of up to 100% and increases the service life
- The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - CAST
- Form - rolling stock
- Shaft diameter - 6 mm
- Total length - 55 to 65 mm
- Milling pin Ø x length - 6 x 16 to 12 x 25 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
Item No.: 652121105083
Type
| designation | WRC 0616/6 CAST |
| overall length | 55 mm |
| Milling pin Ø x length | 6 x 16 mm |
Item No.: 652121105283
Type
| designation | WRC 1020/6 CAST |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
Item No.: 652121105383
Type
| designation | WRC 1225/6 CAST |
| overall length | 65 mm |
| Milling pin Ø x length | 12 x 25 mm |
Ratings
No evaluation has been given
