Milling pin - PFERD - Carbide metal - Shaft Ø 3 mm - for INOX - spherical shape
| From € 29,47 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX), especially round shapes or drill holes
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin made of tungsten carbide in spherical shape, with special INOX teeth, specially developed for processing stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Shape - spherical shape
- Shank diameter - 3 mm
- Total length - 33 to 35 mm
- Milling pin Ø x length - 3 x 2 to 6 x 5 mm
- In accordance with DIN 8032
Versions: (4)
Narrow down your selection
designation
overall length
Milling pin Ø x length
Item No.: 652121211082
Type
| designation | KUD 0302/3 INOX |
| overall length | 33 mm |
| Milling pin Ø x length | 3 x 2 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 29,47 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121212582
Type
| designation | KUD 0403/3 INOX |
| overall length | 34 mm |
| Milling pin Ø x length | 4 x 3 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 35,67 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121212682
Type
| designation | KUD 0504/3 INOX |
| overall length | 35 mm |
| Milling pin Ø x length | 5 x 4 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 35,67 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121213082
Type
| designation | KUD 0605/3 INOX |
| overall length | 35 mm |
| Milling pin Ø x length | 6 x 5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 35,64 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
