Milling pin - PFERD - Carbide - Shank Ø 6 mm - for cast iron - with toothed teeth
| From € 43,84 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges and for changing the geometry of cast iron
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of tungsten carbide in cylindrical shape and with toothed teeth, with special CAST teeth, specially developed for the machining of cast iron, which has a cutting performance of up to 100% and increases the service life
- The milling pin has a markedly increased aggressiveness and a very good chip removal of large chips
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - CAST
- Form - Cylindrical form
- Spur toothing - yes
- Shaft diameter - 6 mm
- Total length - 55 to 65 mm
- Milling pin Ø x length - 6 x 16 to 12 x 25 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
Item No.: 652121100283
Type
| designation | ZYAS 0616/6 CAST |
| overall length | 55 mm |
| Milling pin Ø x length | 6 x 16 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 43,84 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121100483
Type
| designation | ZYAS 1020/6 CAST |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 67,13 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121100583
Type
| designation | ZYAS 1225/6 CAST |
| overall length | 65 mm |
| Milling pin Ø x length | 12 x 25 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 85,89 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
