Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for steel - flame shape
| From € 70,02 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, for changing the geometry and for cleaning steel and cast steel
- The operation can be carried out with compressed air or electric drives and bending shafts
- Flame-shaped milling pin made of tungsten carbide with special STEEL teeth, which has been specially developed for the machining of steel and cast steel and has a cutting performance of up to 50%
- Due to the special tooth geometry, the chip removal is significantly improved, the workpiece and tool are protected by the lower thermal load
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - STEEL
- Shape - flame shape
- Shaft diameter - 6 mm
- Total length - 60 to 75 mm
- Milling pin Ø x length - 8 x 20 to 16 x 35 mm
- Radius - 1.5 to 2.6 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
Item No.: 652121103187
Type
| designation | B 0820/6 STEEL |
| overall length | 60 mm |
| Milling pin Ø x length | 8 x 20 mm |
| radius | 1.5 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 70,02 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121103387
Type
| designation | B 1230/6 STEEL |
| overall length | 70 mm |
| Milling pin Ø x length | 12 x 30 mm |
| radius | 2.1 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 92,07 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121103436
Type
| designation | B 1635/6 STEEL |
| overall length | 75 mm |
| Milling pin Ø x length | 16 x 35 mm |
| radius | 2.6 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 120,49 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
