Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - round arch form
| From € 40,48 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX)
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hardmetal in round arch form, with special INOX teeth, specially developed for machining stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Form - Round arch form
- Shaft diameter - 6 mm
- Total length - 55 to 65 mm
- Milling pin Ø x length - 6 x 18 to 12 x 25 mm
- Radius - 1.5 to 2.5 mm
- In accordance with DIN 8032
Versions: (4)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
| Article No. | designation | overall length | Milling pin Ø x length | radius | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121117382 | RBF 0618/6 INOX | 55 mm | 6 x 18 mm | 1.5 mm |
|
||||
|
||||||||||
|
652121117682 | RBF 0820/6 INOX | 60 mm | 8 x 20 mm | 1.2 mm |
|
||||
|
||||||||||
|
652121117782 | RBF 1020/6 INOX | 60 mm | 10 x 20 mm | 2.5 mm |
|
||||
|
||||||||||
|
652121117882 | RBF 1225/6 INOX | 65 mm | 12 x 25 mm | 2.5 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
