Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - drop shape
| € 81,02 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121135182
Type
| designation | TRE 1220/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 12 x 20 mm |
| radius | 5 mm |
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX)
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin made of tungsten carbide in drop form, with special INOX teeth, specially developed for processing stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Shape - drop shape
- Shaft diameter - 6 mm
- Total length - 56 to 60 mm
- Milling pin Ø x length - 8 x 13 to 12 x 20 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
Item No.: 652121135082
Type
| designation | TRE 0813/6 INOX |
| overall length | 53 mm |
| Milling pin Ø x length | 8 x 13 mm |
| radius | 3.7 mm |
| € 68,49 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121134982
Type
| designation | TRE 1016/6 INOX |
| overall length | 56 mm |
| Milling pin Ø x length | 10 x 16 mm |
| radius | 4 mm |
| € 78,24 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121135182
Type
| designation | TRE 1220/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 12 x 20 mm |
| radius | 5 mm |
| € 81,02 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Ratings
No evaluation has been given
