Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for INOX - Round conical shape
| From € 68,36 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The milling pin is suitable for machining, deburring, machining contours, chamfering and rounding edges, for preparing and leveling welds and for changing the geometry of stainless steel (INOX)
- The operation can be carried out with compressed air or electric drives and bending shafts
- Milling pin of hard metal in round conical shape, with special INOX teeth, specially developed for the processing of stainless steel (INOX), which has a cutting performance of up to 100% and increases the service life
- Due to the low heat development, initial colors are prevented in the material, and due to the optimal chip formation, a high-quality surface finish is achieved
- Thanks to "PFERDERGONOMICS", vibration and noise are reduced, and work comfort is increased
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - INOX
- Shape - Round conical shape
- Shaft diameter - 6 mm
- Total length - 60 to 70 mm
- Milling pin Ø x length - 8 x 20 to 12 x 30 mm
- Angle - 14 to 16 α
- Radius - 1.25 to 2.9 mm
- In accordance with DIN 8032
Versions: (3)
Narrow down your selection
designation
overall length
Milling pin Ø x length
corner
radius
Item No.: 652121124982
Type
| designation | KEL 0820/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 8 x 20 mm |
| corner | 16 α |
| radius | 1.25 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 68,36 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121125082
Type
| designation | KEL 1020/6 INOX |
| overall length | 60 mm |
| Milling pin Ø x length | 10 x 20 mm |
| corner | 14 α |
| radius | 2.9 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 77,27 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121125282
Type
| designation | KEL 1230/6 INOX |
| overall length | 70 mm |
| Milling pin Ø x length | 12 x 30 mm |
| corner | 14 α |
| radius | 2.6 mm |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
| € 117,67 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
