Milling pin - PFERD - Carbide - Conical conical shape - Teeth 3 PLUS
| € 72,67 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121115228
Product Description
- The milling pin is used in the fields of industry, crafts, construction sites, etc. and is suitable for deburring, machining contours, chamfering and rounding edges, for milling to prepare welds, for preparing and leveling weld seams, for casting and for casting Change of geometries
- It is almost universally applicable for all materials
- Carbide end mill with pointed tip
- The high and economical cutting performance is achieved due to the optimum coordination of toothing, hard metal and geometry as well as the long service life
- Thanks to the non-impact work without chatter marks due to the exact run-out, wear is reduced
- For the economical use of the milling pins with a shaft diameter of 6 mm and above, a drive power of 300 to 500 W is required in the upper speed range
- In order to avoid accidents and premature wear, only play-free clamping systems / drives should be used
- Material - hard metal
- Toothing - 3 PLUS
- Shape - pointed cone shape
- Shaft diameter - 8 mm
- Total length - 65 mm
- Milling pin Ø x Length d1 x l2 - 12 to 25 mm
- Angle α-26
- According to DIN 8032, DIN 8033 (with toothing)
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
