High pressure hose TP10HS-NC - PU / PEL - DN 4 to 6 - Size 2 to 4 - Outside Ø 9.1 to 14 mm - PN 700 - Price per roll
| From € 478,21 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The non-conductive thermoplastic hose is ideal for high-pressure use with mineral oils, hydraulic oils and media based on phosphate esters and for use in areas of power generation, on rescue equipment, on aerial work platforms and cable cutting devices, where non-conductive hoses are required.
- The outer cover of the hose is made of orange-colored polyurethane, the inner core is a seamlessly extruded polyester tube. Aramid fibers serve as the pressure carrier.
- The hose enables precise control of the hydraulics - even under the most extreme working conditions - thanks to its high pulse resistance and low expansion.
- The only distinctive features are the minimal change in length and the minimal expansion in volume under operating pressure.
- The abrasion-resistant hose offers high weather and age resistance.
- Attention: The connection nipple must not be oiled on the hose side during assembly. Thanks to a special test mandrel, the collapse of the nipple can be easily checked.
- External ceiling material - polyurethane, non-conductive
- Inner core material - seamlessly extruded polyester tube (PEL)
- Material reinforcement - aramid fibers
- Nominal size - 4 to 6
- Size - 2 to 4
- Outside Ø - 9.1 to 14 mm
- Inside Ø - 4 to 6.6 mm
- Bending radius - 25 to 35 mm
- Operating pressure - 700 bar
- Test pressure (static) - 1400 bar
- Burst pressure - 2800 bar
- Layers - 2
- MSHA approval - no
- Safety factor - 4: 1
- Temperature range - -40 to max. +100 ° C (+ 70 ° C for air- and water-based media)
- Norm / Standards - The hose meets the SAE J517 / J343 and EN855 standards for non-conductivity, where a maximum electrical leakage of 50 uA must not exceed when a 152 mm sample is subjected to 37.5 KV for 5 minutes. Corresponds to 250 KV / meter.
- Roll - 20 to 40 m
Versions: (2)
Narrow down your selection
Nominal size
Size
inch
Outside Ø
Inside-Ø
Bending radius
role
Item No.: 7033TPHSNC04
Type
| Nominal size | 4th |
| Size | 2 |
| inch | 1/8 " |
| Outside Ø | 9.1 mm |
| Inside-Ø | 4 mm |
| Bending radius | 25 mm |
| role | 40 m |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
|
€ 478,21 (€ 11,96 / m)
|
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 7033TPHSNC06
Type
| Nominal size | 6th |
| Size | 4th |
| inch | 1/4 " |
| Outside Ø | 14 mm |
| Inside-Ø | 6.6 mm |
| Bending radius | 35 mm |
| role | 20 m |
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
|
€ 506,80 (€ 25,34 / m)
|
| Price incl. VAT |
Ex stock within 4 days deliverable
Product safety
Unfortunately, the manufacturer's data is not yet available. We will try to update the data as soon as possible.
Ratings
No evaluation has been given
