HP ball valve - galvanised steel - electric actuator (industrial version) - female thread G 1 1/2" - DN 40 - PN -0.3 to 315
(Exemplary presentation)
| € 1.149,04 |
| Price incl. VAT |
Delivery time 2 - 4 working days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
KH1101003317
Product Description
- The high-pressure ball valve is equipped with an electric swivel drive and is ideally suited for feeding hydraulic oil, heating oil and for use under vacuum.
- The housing is made of galvanized steel, the ball is made of hard chrome-plated steel. The ball valve is provided with ball seals made of polyoxymethylene and shaft seals made of nitrile rubber.
- The actuator is equipped with an optical position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limiter prevents damage in the event of overload.
- The motor can be operated in both DC and AC voltage. A heater is integrated in the drive housing.
- Attention: The ball valve must not be used upside down!
- Housing material - galvanized steel
- Ball material - hard chrome-plated steel
- Ball seal material - POM
- Material shift shaft seal - NBR
- Material housing drive - polyamide 6
- Nominal size - 40
- Connection thread (IG) - G 1 1/2 "
- Installation length - 130 mm
- Voltage - 12 to 24 V AC / DC
- Degree of protection - IP 67
- Duty cycle - 75%
- Positioning time - 13 sec.
- Operating pressure - -0.3 to 315 bar
- Media temperature - -10 to max. +80 Â ° C
- Ambient temperature - -20 to max. +70 Â ° C
Ratings
No evaluation has been given
