Flow sensor - Type 8012 - Optical version - Stainless steel - Female thread 1/2" to 2" - 1 analog and 1 digital output - Price per piece
From € 789,29 |
Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The flow sensor with impeller in the optical version is intended exclusively for use with infrared permeable liquids for flow measurement (volume).
- The sensor type 8012 consists of a fitting type S012 and an electronic module type SE12, which are screwed together.
- The fitting system designed by Bürkert ensures easy installation in all pipes from DN 15 mm to DN 50 mm.
- The electronic module has one analog and one digital output.
- The appliance inlet is not included in the scope of delivery.
- Flow rate (volume) - Yes
- Flow (ground) - No
- Temperature - No
- Density - No
- Concentration 1 - No
- continuous measurement - Yes
- Dosage - No
- Switch - Yes
- Display - No
- Protection class measuring device (IP) - IP67
- DC voltage min. - 12 V
- DC voltage max. - 36 V
- Battery voltage - No
- Operating supply type - 3 Ladder
- Accuracy of volume flow in relation to measured value - 1%
- Ambient temperature min - -15 °C
- Ambient temperature max - 60 °C
- Temperature medium min - -15 °C
- Temperature medium max - 100 °C
- Nominal pressure (DIN EN 1333) - PN 16
- Dynamic viscosity min. - 0 cP
- Dynamic viscosity max. - 300 cP
- Detecting the flow direction - Yes
- Sensor type - impeller
- Impeller type - Optical
- Impeller measuring principle Detection - infrared
- Electrical connection Quantity - 1
- Electrical connection type - M12 plug
- Output type analog Quantity - 1
- Output analog current Mode of operation Source - No
- Output analog current Mode of operation Sink - Yes
- Output type analog sine - No
- Output type Current modulated according to NAMUR - No
- Output 1 type analog current - 4 to 20mA
- Output 1 digital Type - transistor
- Output 1 digital Version NC - No
- Output 1 digital Version NO - No
- Output 1 digital transistor connection NPN - Yes
- Output 1 digital transistor connection PNP - No
- Output 1 digital transistor contactless - 0.7 A
- Fluidic line connection Quantity - 2
- Line connection type - female thread
- Line connection Thread designation - G 1/2" to G 2"
- Cable connection material - stainless steel
- Measuring tube material - stainless steel
- Fitting material - PVDF (polyvinylidene fluoride)
- Wetted parts Sealing material - FKM (fluororubber)
- Impeller material - PVDF (polyvinylidene fluoride)
- Impeller axle material - ceramic
- Bearing Material Category - Technical Ceramics
- Bearing material - ceramic
- Roughness tube inside - 1.6 µm
- Roughness of outer tube - 3.2 µm
- Installation length - 84 mm to 148.5 mm
- Weight - 770 g to 1700 g
Versions: (6)
Narrow down your selection
Thread size
Nominal diameter of measuring tube (DN)
Flow rate min.
Max. flow rate
Installation length
Ratings
No evaluation has been given