Fitting for insertion sensors - type S020 - PVC - with adhesive sleeve - DN 15 to DN 50 - price per piece
From € 127,93 |
Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The universal fitting can be used by any insertion device for measurement in the pipe, e.g. for flow, pH, redox potential (ORP) and conductivity measurements.
- The fitting is best suited for neutral, aggressive or contaminated liquids.
- The fitting is suitable for Bürkert vane wheel flowmeters type 8020 and magnetic inductive flowmeters type 8045.
- Material - PVC (polyvinyl chloride)
- Wetted parts Sealing material - FKM (fluororubber)
- Fluidic line connection Quantity - 2
- Fitting electronic interface - Insertion 2"
- Measured value Volume flow rate min. - 196 to 2,400 l/h
- Measured value Volume flow rate max. - 6,533 to 80,023 l/h
- Cable connection 1 Type - Glue socket
- Line connection 1 thread - G 1 to G 2/34
- Cable connection 1 Inside diameter (mm) - 20 to 63 mm
- Pipe connection 1 Size DN - DN 15
- Cable connection 1 Outer diameter (mm) - 28 to 74 mm
- Line connection 1 DN inch - 0.5 to 2 inches
- Cable connection 1 Gluing - DIN 8063
- Nominal pressure (DIN EN 1333) - PN 10
- Temperature medium min. - 0 °C
- Temperature medium max. - 50 °C
Versions: (5)
Narrow down your selection
Volume flow min./max.
Nominal diameter of measuring tube (DN)
Cable connection 1 Thread designation
Installation length
Ratings
No evaluation has been given