FESTO - Mini slide unit - EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA - (8083818) - Size 45 - Stroke 125 mm

Product Description

The mini slide unit is used as a component in industrial plants.

Application

The "EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA mini slide unit" is a high-precision linear motion unit with a size of 45 and a working range of 125 mm.
It has a ball screw with a spindle pitch of 10 mm, driven by a stepper motor.
The unit has a recirculating ball bearing guide that provides smooth and accurate movement.
Furthermore, it is equipped with an absolute single encoder and supports position detection by proximity switches as well as by a motor encoder.

Technical Data

Working stroke - 125 mm
Size - 45
Stroke reserve - 0 mm
Reversing clearance - 150 µm
Spindle diameter - 10 mm
Spindle pitch - 10 mm
Mounting position - any
Guide - recirculating ball bearing guide
Constructional design - Electric mini slide with ball screw with integrated drive
Motor type - stepper motor
Referencing - fixed stop block negative, fixed stop block positive, reference point
Spindle type - ball screw
Position detection - for proximity switches, motor encoders
Rotor position encoder - Encoder absolute single turn
Rotor position sensor Measuring principle - magnetic
Additional functions - user interface, integrated end position detection
Display - LED
Ready for operation indicator - LED
Max. Acceleration - 5 m/s²
Max. Speed - 0.25 m/s
Repeatability - ±0.015 mm
Properties digital logic outputs - not galvanically isolated, configurable
Duty cycle - 100
Insulation protection class - B
Max current digital logic outputs - 100 mA
Max. Current consumption - 3,000 mA
Rated voltage DC - 24 V
Rated current - 3 A
Parameterization interface - IO-Link, user interface
Rotor position encoder resolution - 16 bit
Permissible voltage fluctuations - ± 15
Power supply, connection type - connector
Power supply, connection technology - M12x1, T-coded according to EN 61076-2-111
Power supply, number of poles/wires - 4
Approval - RCM Mark
KC sign - KC-EMV
CE mark (see Declaration of Conformity) - according to EU EMC Directive, according to EU RoHS Directive
Vibration resistance - transport test with severity level 1 according to FN 942017-4 and similar standards
Shock resistance - shock test with severity level 1 according to FN 942017-5 and EN 60068-2-27
Corrosion resistance class KBK - 0 (no corrosion stress)
Storage temperature - -20 to 60 °C
Relative humidity - 0 - 90
Protection class - IP40
Protection class - III
Ambient temperature - 0 to 50 °C
Note on ambient temperature - Above 30 °C power reduction required
Basic dynamic load rating locating bearing - 7,413 N
Basic dynamic load rating linear guide - 3,240 N
Basic dynamic load rating ball screw - 3,200 N
Max. Force Fy - 1.314 N
Max. Force Fz - 1,314 N
Max. Moment Mx - 8.14 Nm
Max. Moment My - 7.05 Nm
Max. Moment Mz - 7.05 Nm
Max. Radial force on drive shaft - 340 N
Max. Feed force Fx - 120 N
Guideline payload, horizontal - 6 kg
Guideline payload, vertical - 6 kg
Basic static load rating ball screw - 5,900 N
Basic static load rating linear guide - 5,630 N
Feed constant - 10 mm/rev
Basic static load rating fixed bearing - 3,966 N
Guideline mileage - 5,000 km
Maintenance interval - Lifetime lubrication
Surcharge moving mass per 10 mm stroke - 30 g
Number of digital logic outputs 24 V DC - 2
Number of digital logic inputs - 2
Specification logic input - following IEC 61131-2, type 1
Operating range logic input - 24 V DC
IO-Link, SIO mode support - yes
Properties logic input - not galvanically isolated, configurable
IO-Link, Protocol - Device V 1.1
IO-Link, communication mode - COM3 (230.4 kBaud)
IO-Link, port type - A
IO-Link, number of ports - 1
IO-Link, process data width OUT - 2 bytes
IO-Link, process data width IN - 2 bytes
IO-Link, service data content IN - 32 bit Force, 32 bit Position, 32 bit Speed
IO-Link, minimum cycle time - 1 ms
IO-Link, data memory required - 500 bytes
Max. Cable length - 20 m for IO-Link operation, 15 m outputs, 15 m inputs
Switching logic outputs - PNP (positive switching)
Switching logic inputs - PNP (positive switching)
IO-Link, connection technology - connector
Logic interface, connection type - connector
Logic interface, connection technology - M12x1, A-coded according to EN 61076-2-101
Logic interface, number of poles/wires - 8
Logic interface, connection diagram - 00992264
Mounting type - with female thread, with centering sleeve, with accessories, with cylindrical pin
Moving mass at 0 mm stroke - 212 g
Weight allowance per 10 mm stroke - 63 g
Basic weight at 0 mm stroke - 1,238 g
Product weight - 2,024 g
Price per piece

FESTO - Mini slide unit - EGSS-BS-KF-45-125-10P-ST-M-H1-PLK-AA - (8083818) - Size 45 - Stroke 125 mm - Price per piece