Burr - PFERD - carbide - Shank Ø 8 mm - teardrop - Cut 3 PLUS and 4
| From € 67,51 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is used in the fields of industry, trade, construction, etc. and is suitable for deburring, Editing contours, chamfering and rounding edges, for milling in preparation of welds, for preparing and leveling of welds, clean the cast and to change of geometries
- he is almost universally applicable for all materials
- Application
- HM burr teardrop
- the high economic and cutting performance is achieved due to the optimal coordination of teeth, carbide and geometry and the high life
- by the impact free work without chatter marks due to the exact concentricity reduces wear
- a drive power of 300 to 500 W is in the upper speed range for the economic use of the burrs with a shank diameter of 6 mm is required
- to prevent accidents and premature wear should only rigid clamping systems / drives are used
- Material - Carbide
- Toothing - 3 PLUS or 4
- Form - teardrop
- Stem diameter - 8 mm
- Total length - 60 or 65 mm
- Burr-Ø x Length d1 x l2 - 12 to 20 mm or 16 to 25 mm
- Radius - 5 and 6.5 mm
- according to standard - DIN 8032, DIN 8033 (with teeth)
Versions: (2)
Narrow down your selection
designation
Perforation
overall length
Burr ø x length x d1 l2
radius
Item No.: 652121135128
Type
| designation | TRE 1220/8 Z3 PLUS |
| Perforation | 3 PLUS |
| overall length | 60 mm |
| Burr ø x length x d1 l2 | 12-20 mm |
| radius | 5 mm |
| € 67,51 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121135228
Type
| designation | TRE 1625/8 Z3 PLUS |
| Perforation | 3 PLUS |
| overall length | 65 mm |
| Burr ø x length x d1 l2 | 16 - 25 mm |
| radius | 6.5 mm |
| € 98,84 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Ratings
No evaluation has been given
