Burr "PFERD" - carbide - Shank Ø 6 mm - tear drop - TOUGH-toothing
| € 74,29 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
652121000126
Type
| designation | TRE 1220/6 TOUGH |
| overall length | 60 mm |
| radius | 5 mm |
| Burr ø x length x d1 l2 | 12-20 mm |
Product Description
- the burr is suitable for rough use in industry, crafts, etc. and allows the milling close contours, working with high angles of contact and all application situations where only a limited speed available
- Application
- drop-shaped burr with innovative special cut
- thanks to this set of teeth extremely sensitive to shock, tooth breakage, flaking and burr breaking be minimized
- the teeth TOUGH is particularly aggressive and ensures a high stock removal
- a drive power of 300 to 500 W is in the upper speed range for the economic use of the burrs with a shank diameter of 6 mm is required
- to prevent accidents and premature wear should only rigid clamping systems / drives are used
- Material - Carbide
- Toothing - TOUGH
- Form - tear drop
- Shaft diameter - 6 mm
- Total length - 56 or 60 mm
- Radius - 4 or 5 mm
- Burr-Ø x Length d1 x l2 - 10 to 16 or 12 to 20 mm
- according to standard - DIN 8032
Versions: (2)
Narrow down your selection
designation
overall length
radius
Burr ø x length x d1 l2
Item No.: 652121000124
Type
| designation | TRE 1016/6 TOUGH |
| overall length | 56 mm |
| radius | 4 mm |
| Burr ø x length x d1 l2 | 10-16 mm |
| € 71,71 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Item No.: 652121000126
Type
| designation | TRE 1220/6 TOUGH |
| overall length | 60 mm |
| radius | 5 mm |
| Burr ø x length x d1 l2 | 12-20 mm |
| € 74,29 |
| Price incl. VAT |
Ex stock within 4 days deliverable
Ratings
No evaluation has been given
