Braided hose SP1plus RAIL HOSE - rubber - DN 6 to 25 - outside Ø 12.1 to 33.2 mm - PN up to 290 - price per meter
From € 8,97 |
Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The hydraulic hose of the SUPER-POWER® line is ideal for use with hydraulic oils (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) and for use in rail transport and on track construction machines that comply with EN 45545-2 is required.
- The abrasion-resistant outer cover of the hose is made of ozone-resistant, synthetic rubber, a steel wire mesh serves as a pressure carrier. The inner liner is made of synthetic rubber.
- The hose exceeds the requirements of EN 857-1SC and meets the requirements of EN 45545-2.
- Attention: When laying the hose line, the minimum bending radius should be adhered to, as a shortfall can considerably shorten the service life.
- Material outer cover - synthetic rubber, wear-resistant and ozone-resistant
- Material reinforcement - steel wire mesh
- Inner liner material - synthetic rubber
- Nominal size - 6 to 25
- Size - 4 to 16
- Outside Ø - 12.1 to 33.2 mm
- Inside Ø - 6.6 to 26 mm
- Bending radius - 40 to 160 mm
- Working pressure - 110 to 290 bar
- Test pressure (static) - 220 to 580 bar
- Burst pressure - 440 to 1160 bar
- Layers - 1
- MSHA approval - no
- Safety factor - 4: 1
- Temperature range - -40 to max. +100 ° C (+70 ° C for water and water-based media)
- Standard - EN 857 - 1SC // EN 45545-2
Versions: (7)
Narrow down your selection
Nominal size
Size
inch
Outside Ø
Inside-Ø
Bending radius
operating pressure
Ratings
No evaluation has been given