Ball valve - nickel-plated brass - pneum. Actuator - double-acting - L-bore - IG G 1/4 "to G 2" - DN 10 to 40 - PN 0 to 40
From € 288,36 |
Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The 3-way ball valve is equipped with a pneumatic swivel drive and is ideally suited for the passage of water, compressed air, oils, fuels, heating oil, solvents as well as weak acids and alkalis.
- The housing of the ball valve is made of nickel-plated brass, the ball is made of hard chrome-plated brass. The ball valve is provided with seals made of Teflon and nitrile rubber.
- The drive housing is made of anodized aluminum, the rack and piston are made of aluminum. The drive has a cover made of acetal resin and seals made of nitrile rubber.
- The ball is provided with an L-hole.
- The pressure inlet is possible from all three sides.
- The quarter turn actuator is built in conformity with ATEX.
- Attention: The drive may have to be cooled if the media temperature is high.
- Ball valve housing material - nickel-plated brass
- Material ball - hard chrome-plated brass
- Ball valve seal material - PTFE / NBR
- Drive housing material - anodized aluminum
- Material rack / piston - aluminum
- Drive cover material - acetal resin
- Material seal drive - NBR
- Function - double acting
- Nominal size - 10 to 40
- Connection thread (IG) - G 1/4 "to G 2"
- Installation length - 76 to 165 mm
- Working pressure - 0 to 40 bar
- Control pressure - 6 to 10 bar
- Media temperature - -10 to max. +100 Â ° C
- Ambient temperature - -20 to +80 Â ° C
- ATEX approval - EX II 2GD c 85Â ° C (actuators from size 12: EX II 2GD c 110Â ° C)
The corresponding circuit symbol can be found in the product data sheet.
Versions: (8)
Narrow down your selection
Port ball valve
Nominal passage
Installation length ball valve
Ratings
No evaluation has been given