Ball valve - nickel-plated brass - electr. Drive - T-bore (T2) - IG G 1/4 "to G 2" - DN 10 to 40 - PN 0 to 40
From € 753,38 |
Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The 3-way ball valve is equipped with an electric swivel drive and is ideally suited for the passage of water, compressed air, oils, fuels, heating oil, solvents, paints, varnishes as well as weak acids and alkalis.
- The housing is made of nickel-plated brass, the ball is made of hard chrome-plated brass. The ball valve is provided with seals made of Teflon and nitrile rubber.
- The actuator is equipped with an optical position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limiter prevents damage in the event of overload.
- The motor can be operated in both DC and AC voltage. A heater is integrated in the drive housing.
- The pressure inlet is possible from all three sides.
- Attention: The ball valve must not be used upside down!
- Housing material - nickel-plated brass
- Material ball - hard chrome-plated brass
- Material seal - PTFE / NBR
- Material housing drive - polyamide 6
- Ball - T-Hole (T2)
- Nominal size - 10 to 40
- Connection thread (IG) - G 1/4 "to G 2"
- Installation length - 76 to 165 mm
- Voltage - 24 to 240 V AC / 24 to 135 V DC
- Degree of protection - IP 67
- Duty cycle - 75%
- Positioning time - 9 sec.
- Working pressure - 0 to 40 bar
- Media temperature - -10 to max. +100 Â ° C
- Ambient temperature - -20 to max. +70 Â ° C
A diagram of the switch positions can be found in the product data sheet.
Versions: (8)
Narrow down your selection
thread
DN
installation length
Ratings
No evaluation has been given