Ball valve - nickel-plated brass - electr. Actuator - positioning time 140 sec. - IG G 1 1/2 "- DN 38 - PN -0.9 to 40
(Exemplary presentation)
| € 822,89 |
| Price incl. VAT |
Delivery time 2 - 4 working days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
851901005490
Product Description
- The ball valve is equipped with an electric swivel drive and is ideally suited for the passage of water, compressed air, oils, fuels, heating oil, solvents, paints, varnishes, weak acids and alkalis as well as for use under vacuum .
- The housing is made of nickel-plated brass, the ball is made of hard chrome-plated brass. The ball valve is provided with seals made of Teflon and fluororubber.
- The actuator is equipped with an optical position indicator and has two additional limit switches for further control tasks as well as a manual override. The electronic torque limiter prevents damage in the event of overload.
- The motor can be operated in both DC and AC voltage. A heater is integrated in the drive housing.
- The overall length is standardized according to DIN 3202-M3. DVGW approval is also available.
- Attention: The ball valve must not be used upside down!
- Housing material - nickel-plated brass
- Material ball - hard chrome-plated brass
- Material seal - PTFE / FKM
- Material housing drive - polyamide 6
- Nominal size - 38
- Connection thread (IG) - G 1 1/2 "
- Installation length - 120 mm
- Voltage - 85 to 240 V DC
- Degree of protection - IP 67
- Duty cycle - 75%
- Positioning time - 140 sec.
- Working pressure - -0.9 to 40 bar
- Media temperature - -20 to max. +160 Â ° C
- Media temperature (gas) - -20 to max. +60 Â ° C
- Ambient temperature - -20 to max. +70 Â ° C
Ratings
No evaluation has been given
