Assembly mortar FIS VL 300 T - vinyl ester - 150 scale parts - 300 ml - 20 pieces in a craftsman's case
|
€ 566,12 (€ 94,35 / l)
|
| Price incl. VAT |
Ex stock within 4 days deliverable
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
921000553657
Product Description
- The FIS VL installation mortar is approved for fastening standard applications in cracked concrete and in masonry, where it achieves a high load-bearing capacity. The FIS VL injection mortar is processed with the approved system components FIS A anchor rod and RG MI internal threaded anchor in interior and exterior areas. The installation mortar is approved for anchoring in cracked concrete C20/25 to C50/60, lightweight concrete hollow block, hollow perforated brick, perforated sand-lime brick, solid sand-lime brick, solid brick, rebar connectors and aerated concrete. It is additionally suitable for concrete C12/C15 and hollow concrete block.
- The wide-ranging temperature resistance of FIS VL injection mortar enables a good load level even at high temperature requirements, allowing high flexibility in processing. The 2K injection mortar based on vinyl ester resin enables anchoring in concrete in water-filled boreholes, which enables rapid work progress.
- The resin and hardener are stored in two separate chambers and are only mixed and activated during squeezing. The mortar is injected from the bottom of the borehole without bubbles. The mortar bonds the fastening material to the borehole wall over the entire surface and seals the borehole.
- FIS VL 300 T assembly mortar can be processed with commercially available silicone pressing equipment without special tools. Opened cartridges can be reused by changing the static mixer.
- Temperature resistance - -40°C to +120°C
- Approvals - ETA-15/0263, DoP No. 0194, DoP No. 0195, 21909_1 and GS 3.2/18-159-1-r1
- Scale parts - 150
- Content - 20 x 300 ml cartridges, 40 x FIS MR Plus static mixers
Ratings
No evaluation has been given
