Abrasive fleece - PFERD POLINOX® - made of corundum or silicon carbide - for stainless steel, titanium etc. - Price per PU
| From € 165,47 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the abrasive fleece enables the processing of fillet welds and hard-to-reach recesses and slots made of stainless steel (INOX)
- they are suitable for use with angle grinders and fillet weld grinders
- the abrasive fleece consists of a multi-layered and highly compressed fleece material and is bonded with a grain-resin system
- due to the bonding system, it has a high removal rate and a good service life
- the abrasive is made of corundum or silicon carbide and is available in different grit sizes and designs
- pFERDERGONOMICS®" reduces vibration, noise and dust generation during use and improves working comfort
- the abrasive fleece develops its best performance at a cutting speed of 30 m/s
- for safety reasons, the maximum permissible speed must not be exceeded
- Abrasive material - corundum or silicon carbide
- suitable for - stainless steel (INOX)
- Dimensions (D x D) - 125 x 6 to 150 x 6 mm
- Bore diameter - 22.23 or 25.4 mm
- Grit size - G (coarse) or F (fine)
- Version - soft, medium soft, medium hard, hard
- recomm. Speed - 3800 to 4500 min-¹
- max. permissible speed - 5100 to 6100 min-¹
- PU 10 pieces
- Price per PU
Versions: (11)
Narrow down your selection
Designation
Abrasives
Dimensions (D x D)
Bore Ø
Grain size/design
recomm. Speed
max. permissible speed
VE
| Article No. | Designation | Abrasives | Dimensions (D x D) | Bore Ø | Grain size/design | recomm. Speed | max. permissible speed | VE | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
658244691052 | PNER-H 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / hard | 4500 min-1 | 6100 min-1 |
|
|||||
|
||||||||||||||
|
658244691053 | PNER-H 12506-22.2 A G | corundum | 125 x 6 mm | 22.23 mm | rough / tough | 4500 min-1 | 6100 min-1 |
|
|||||
|
||||||||||||||
|
658244691252 | PNER-MH 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / medium hard | 4500 min-1 | 6100 min-1 |
|
|||||
|
||||||||||||||
|
658244691452 | PNER-MW 12506-22.2 SiC F | Silicon carbide | 125 x 6 mm | 22.23 mm | fine/medium soft | 4500 min-¹ | 6100 min-¹ | 5 pieces |
|
||||
|
||||||||||||||
|
658244691453 | PNER-MW 12506-22.2 A F | corundum | 125 x 6 mm | 22.23 mm | fine / medium soft | 4500 min-1 | 6100 min-1 |
|
|||||
|
||||||||||||||
|
658244691628 | PNER-MW 15003-25.4 SiC F | silicon carbide | 150 x 3 mm | 25.4 mm | fine / medium soft | 3800 min-1 | 5100 min-1 |
|
|||||
|
||||||||||||||
|
658244691629 | PNER-MH 15003-25.4 SiC F | silicon carbide | 150 x 3 mm | 25.4 mm | fine / medium hard | 3800 min-1 | 5100 min-1 |
|
|||||
|
||||||||||||||
|
658244691630 | PNER-H 15003-25.4 A F | corundum | 150 x 3 mm | 25.4 mm | fine / hard | 3800 min-1 | 5100 min-1 |
|
|||||
|
||||||||||||||
|
658244691631 | PNER-W 15006-25.4 SiC F | silicon carbide | 150 x 6 mm | 25.4 mm | fine / soft | 3800 min-1 | 5100 min-1 |
|
|||||
|
||||||||||||||
|
658244691632 | PNER-MW 15006-25.4 SiC F | Silicon carbide | 150 x 6 mm | 25.4 mm | fine/medium soft | 3800 min-¹ | 5100 min-¹ | 5 pieces |
|
||||
|
||||||||||||||
|
658244691633 | PNER-H 15006-25.4 A F | corundum | 150 x 6mm | 25.4 mm | fine / hard | 3800 min-1 | 5100 min-1 |
|
|||||
|
||||||||||||||
Ratings
No evaluation has been given
